IAI MSEL, Instruction Manual, Page: 112 / 234

Chapter 5 I/O Parameter
104
I/O Parameters
No. Parameter name
Default value
(Reference)
Input range Unit Remarks
130 Own MAC address (H) 0H
Referency only
(HEX)
Only lower two bytes are valid.
131 Own MAC address (L) 0H
Referency only
(HEX)
132 Own IP address (H) 192 1 ~ 255 * Setting of 0 and 127 is prohibited.
133 Own IP address (MH) 168 0 ~ 255
134 Own IP address (ML) 0 0 ~ 255
135 Own IP address (L) 1 1 ~ 254
* 0 and 255 are available to set only in main application
V2.00 and later.
136 Subnet mask (H) 255 0 ~ 255
137 Subnet mask (MH) 255 0 ~ 255
138 Subnet mask (ML) 255 0 ~ 255
139 Subnet mask (L) 0 0 ~ 255
140 Default gateway (H) 0 0 ~ 255
141 Default gateway (MH) 0 0 ~ 255
142 Default gateway (ML) 0 0 ~ 255
143 Default gateway (L) 0 0 ~ 255
144
IAI protocol B/TCP: Own port
number (MANU mode)
64511 1025 ~ 65535
145
User-open channel 31
(TCP/IP): Own port number
64512 1025 ~ 65535
146
User-open channel 32
(TCP/IP): Own port number
64513 1025 ~ 65535
147
User-open channel 33
(TCP/IP): Own port number
64514 1025 ~ 65535
148
User-open channel 34
(TCP/IP): Own port number
64515 1025 ~ 65535
* Important: Be sure to set a different number for each
own port number. (Duplication is permitted only for own
port numbers under IAI protocol B/TCP in the
MANU/AUTO modes.)
149
IAI protocol B/TCP: IP address
of connection destination
(MANU mode) (H)
192 0 ~ 255 * Setting of 0 and 127 is prohibited.
150
IAI protocol B/TCP: IP address
of connection destination
(MANU mode) (MH)
168 0 ~ 255
151
IAI protocol B/TCP: IP address
of connection destination
(MANU mode) (ML)
0 0 ~ 255
152
IAI protocol B/TCP: IP address
of connection destination
(MANU mode) (L)
100 0 ~ 254 * Setting of 0 and 255 is prohibited.
153
IAI protocol B/TCP: Port
number of connection
destination (MANU mode)
64611 0 ~ 65535
* 0 can be set, if server.
0 = Port number of connection destination ignored
(Only IP address is checked)
* 0 cannot be set, if client.
154
IAI protocol B/TCP: IP address
of connection destination
(AUTO mode) (H)
192 0 ~ 255 * Setting of 0 and 127 is prohibited.
155
IAI protocol B/TCP: IP address
of connection destination
(AUTO mode) (MH)
168 0 ~ 255
156
IAI protocol B/TCP: IP address
of connection destination
(AUTO mode) (ML)
0 0 ~ 255
157
IAI protocol B/TCP: IP address
of connection destination
(AUTO mode) (L)
100 0 ~ 254 * Setting of 0 and 255 is prohibited.
158
IAI protocol B/TCP: Port
number of connection
destination (AUTO mode)
64611 0 ~ 65535
* 0 can be set, if server.
0 = Port number of connection destination ignored
(Only IP address is checked)
* 0 cannot be set, if client.
159
IAI protocol B/TCP: Own port
number (AUTO mode)
64516 1025 ~ 65535
* Important: Be sure to set a different number for each
own port number. (Duplication is permitted
only for own port numbers under IAI protocol
B/TCP in the MANU/AUTO modes.)
160
Vision system I/F connected IP
address (H)
(For PC/PG/PCF/PGF type)
192 0 ~ 255
* Setting of 0 and 127 is prohibited.
* PCX/PGX type is system reservation
161
Vision system I/F connected IP
address (MH)
(For PC/PG/PCF/PGF type)
168 0 ~ 255 * PCX/PGX type is system reservation
162
Vision system I/F connected IP
address (ML)
(For PC/PG/PCF/PGF type)
0 0 ~ 255 * PCX/PGX type is system reservation