IAI ERC3, Instruction Manual

Page: 159 / 188

Chapter 4 I/O Parameter
151
Chapter 4 I/O Parameter
Parameters are the data to set up considering the system and application.
The ERC3 Gateway Unit setting is to be conducted using Gateway Parameter Setting Tool.
[Refer to 3.7. About Gateway Parameter Setting Tool for the details]
Note The ERC3 actuator for Parameter is to be done with using a teaching tool such as the
RC PC software. [Refer to Instruction Manual for the ERC3 actuator with integrated
controller for more information]
Warning: Parameter setting has great influences on operations of the controller.
Incorrect parameter setting may not only cause malfunction or failure of the
controller to occur but also people and assets to be exposed to risk.
The controller is configured to be applicable to normal operation at shipment.
Understand very well about the control logic of controller if making a change
or performing a setting suitable to the system.
Please contact us if you have anything unclear.
Do not attempt to turn OFF the power to the controller while writing the
parameters.
ME0302-4A