HUSTLER X-ONE 936740CE, Operator'S Manual, Page: 216 / 506

REV C 5-2 606839CE
CZ
DA
DE
EN
ES
FR
IT
NL
PT
SV
Uneven cutting height The blade(s) are not sharp Sharpen the blades
A cutting blade(s) is/are
bent
Install new cutting blade(s)
The deck is not level Level the deck per the Deck
leveling and height adjust-
ment section of the General
Service Manual
An anti-scalp wheel is not
set correctly
Adjust the height of the
anti-scalp wheel
The underside of the deck
is dirty
Clean the underside of the
deck
Tires improperly inflated Adjust air pressure to 55–
83 KPa
A blade spindle is bent Contact your dealer
Flex Forks
®
are installed
After initial break-in period,
level the deck per the Deck
Leveling section of the Gen-
eral Service Manual.
SYMPTOMS PROBABLE CAUSES
SUGGESTED
REMEDIES