HUSTLER X-ONE 936740CE, Operator'S Manual, Page: 210 / 506

REV C 4-10 606839CE
CZ
DA
DE
EN
ES
FR
IT
NL
PT
SV
NOTES:
1.
Initial engine oil change is after 5 hours of operation. Thereafter, change oil after every 40 hours operation. Change more often under dusty or
dirty conditions and during hot weather periods. Hustler
® Motor Oil is recommended.
2.
Torque initially and after first 2 hours of operation.
3.
Perform
initial
hydraulic oil and filter change after 750 hours of operation. Thereafter, change oil and filter every 500 hours (every 750 hours for
Hustler ® 100% Synthetic Hydrostatic Transmission Oil or Parker HT-1000 oil).
4.
Change engine oil filter per the engine manufacturer’s recommendations. Refer to Engine Owner’s Manual for recommendations and other
maintenance items.
5.
Service more often under dusty or dirty conditions. Use caution when servicing to prevent dust contamination in the engine. Do not clean filter
element. Replace with a new one.
6.
Pump drive belt only - Inspect belt every 100 hours and replace if worn or cracking is noticed. Check spring tension adjustment. Otherwise,
replace belt every 400 hours or 2 years whichever comes first. Check and adjust spring tension after 50 hours of use as outlined in the Hydraulic
Pump Belt Adjustment section of the General Service Manual (123940).
Maintenance Schedule
Refer to Figure 4-19, Figure 4-20, Figure 4-21, & Figure 4-22
SERVICE AT
INTERVALS INDICATED
WEEKLY
OR 50
HOURS
MONTHLY
OR 100
HOURS
* ANNUALLY
OR 500
HOURS
Verify safety start interlock system Prior to each use
Visually inspect unit for loose hardware and/or damaged parts Prior to each use
Visually inspect tires Prior to each use
Check oil level, engine (1) (4) Prior to each use or every 4 hours
Clean air intake screen (8) Prior to each use or every 4 hours
Check fuel level Prior to each use
Blades - sharpen & securely fastened Prior to each use
Discharge chute - securely in place & in lowest position Prior to each use
Rear discharge deck flaps and/or power unit deflector securely in place Prior to each use
Clean engine and pump compartment (13) Daily
Check air cleaner service indicator (8) Daily
Replace engine air cleaner element (5) (10) As needed
Caster fork tapered bearings (11) Regular maintenance not required
Change engine oil and filter (1) (4) X
Clean cylinder and head fins (10) X
Check battery connections (13) X
Check tire pressure with a gauge X
Check hydraulic oil level (13) X
Clean engine exterior (10) X
Tighten lug nuts on wheels (2) X
Grease deck pusher arms (8) X
Grease pump idler (8) X
Grease deck height pivots (8) X
Grease front wheel bearings (8) (12) X
Clean & regap spark plugs (10) X
Check pump and deck belt tension and condition (6) (13) X
Check fuel system (7) (13) X
Check fuel valve (7) X
Check fuel tank grommets (7) X
Change fuel filter (7) X
Change hydraulic filter & oil (3) (13) X
Grease deck spindle housings X
Replace spark plugs (10) X
Check ROPS mounting hardware (9) X
Replace fuel evaporation system filter (8) (13) X