Step 3 Choose the upper-layer node of the management domain to be added in the
navigation tree on the left.
Step 4 In the Domain area on the lower left of the page, drag a management domain
icon to the required position in the planning configuration area.
NO TE
You can adjust the shape of Room, Room–ShapeNode, Building–ShapeNode, Floor–
ShapeNode, Container–ShapeNode, and NetecoSite by:
1. Hold down Shift and click the frame to add a yellow dot.
2. Click and move the yellow dot to design an irregular polygon.
3. To delete a management domain, click the domain icon and select Delete under
.
Step 5 In the right side of the view area, set Management Info.
NO TE
You can configure Management Info, Electricity Info, and Refrigeration Info for the
equipment room management domain.
Step 6 Click on the toolbar to save the settings.
Step 7 Repeat steps
to
until the configuration is complete.
----End
5.3.14.10.2 Example: Adding a Smart Module
This section describes how to create a module in the root node, subnet, equipment
room, container, or site management domain.
Prerequisites
You have created management domains in Planning Configuration.
Procedure
Step 1 Log in to the NetEco client.
Step 2 On the main menu, choose Device Management > Configuration > Planning
Configuration.
Step 3 Choose the management domain where you want to add a smart module from
the navigation tree on the left.
Step 4 In the Domain area on the lower left of the page, select Modular from the drop-
down list box.
Step 5 Select the Modular to be added and drag the modular icon to the management
domain area.
FusionModule2000-S Smart Modular Data Center
User Manual
5 Power-On Commissioning
Issue 03 (2021-07-15)
Copyright © Huawei Technologies Co., Ltd.
217
