●
Inspect the scaffolding, springboards, and workbenches used for working at
heights in advance to ensure that their structures are solid and not
overloaded.
●
Any violations must be promptly pointed out by the site manager or safety
supervisor and the involved personnel should be prompted for correction.
Personnel who fail to stop violations will be forbidden from working.
1.5 Mechanical Safety
Hoisting Devices
●
Do not walk under hoisted objects.
●
Only trained and qualified personnel should perform hoisting operations.
●
Check that hoisting tools are available and in good condition.
●
Before hoisting objects, ensure that hoisting tools are firmly secured onto a
load-bearing object or wall.
●
Ensure that the angle formed by two hoisting cables is no more than 90
degrees, as shown in the following figure.
●
Do not drag steel ropes and hoisting tools or bump hoisted objects against
hard objects during hoisting.
Using Ladders
●
Use wooden or fiberglass ladders when you need to perform live working at
heights.
●
When a step ladder is used, ensure that the pull ropes are secured and the
ladder is held firm.
●
Before using a ladder, check that it is intact and confirm its load bearing
capacity. Do not overload it.
FusionModule2000-S Smart Modular Data Center
User Manual
1 Safety Information
Issue 03 (2021-07-15)
Copyright © Huawei Technologies Co., Ltd.
8