Huawei V100R021C10 User Manual Download Page 223

Page: 223 / 287

Procedure

Step 1 In the browser address bar, enter https://192.168.8.11:31945, and then press

Enter.

NO TE

192.168.8.11 is the default IP address of the NetEco.

Step 2 Enter the User Name, Password on the login page and click Log In.

NO TE

● The default user name for the PowerEcho is admin and the preset password is

Changeme_123. You need to change the password periodically (at an interval of 60

days) to improve system security.

● After the first login, change the password in time to ensure account security and prevent

unauthorized network attacks, such as data tampering. Huawei will not be liable for any

security issues caused by your failure to change the preset password in time or password

loss after changing.

● After you enter the incorrect password for three consecutive times, you must enter the

verification code upon the fourth login. After you enter the incorrect password for five

consecutive times, the IP address will be locked for 10 minutes.

----End

5.3.14.6 NetEco Menu Settings

Prerequisites

You have logged in to the PowerEcho client using a browser.

Procedure

Step 1 Choose NetEco Maintenance from the main menu. Then choose NetEco Menu

Settings in the navigation tree on the left side.

Option

Description

Setting NetEco Menu

In the NetEco Menu Settings area,

select or clear NetEco menu options,

click Confirm.

NOTE

After NetEco menu settings, refresh the

NetEco client page to check that the menu

settings take effect.

----End

5.3.14.7 Logging In to the NetEco Client

This section describes how to log in to the NetEco client using a web browser.

FusionModule2000-S Smart Modular Data Center

User Manual

5 Power-On Commissioning

Issue 03 (2021-07-15)

214

Summary of Contents for V100R021C10
































































































































































































































































































Search results

Summary of Contents for V100R021C10

Reviews:

Related manuals for V100R021C10

Brands by name

Popular brands

Huawei V100R021C10, User Manual

Search results

Summary of Contents for V100R021C10

Reviews:

Related manuals for V100R021C10

Brands by name

Popular brands