HP StorageWorks 2000fc, Reference Manual

Page: 88 / 330

88 HP StorageWorks 2000 Family Modular Smart Array reference guide • August 2008
On Volume Management pages, the Volume Menu panel shows a color-coded “map”
of the space used by each volume in the selected virtual disk. The color codes are:
■
Gray – Free space
■
Green – Standard volume
■
Blue – Snap pool
■
Orange – Master volume
■
Yellow – Snapshot
The panel also shows a table with information about each volume and the amount of
free space. The information that is shown varies, depending on the page.
Figure 3-2 Volume Map and Table Example
Note – For an explanation of sizes represented by various units, see “Size
Representations in SMU” on page 27.
Changing a Volume Name
You can change the name of a volume. This does not affect the target ID or LUN
values of the volume.
To change a volume name:
1. Select Manage > Volume Management > Volume Menu > Change Volume Name.
For each virtual disk, the virtual disk panel shows a status icon; the name, RAID
level, size, number of disk drives, and number of volumes; and utility status, if any.
2. Select a virtual disk.
The selected virtual disk’s volume names, sizes, and types are displayed, and the
amount of free space.