manualshive.com logo in svg

HP StorageWorks 2000fc, Reference Manual

Share
Download
HP StorageWorks 2000fc Reference Manual Download Page 118

118

HP StorageWorks 2000 Family Modular Smart Array reference guide • August 2008

Deleting a Snapshot

You can delete snapshots at any time, including when:

■

The associated snap pool is reaching capacity and you want to free some space

■

The maximum number of snapshots is reached and you want to delete older 
snapshots

■

You no longer need the data associated with the snapshot

To delete a snapshot:

1. Unmount the snapshot from hosts.

2. Select Manage > Volume Management > Snapshot Services > Delete Snapshot.

For each virtual disk, the virtual disk panel shows a status icon; the name, RAID 
level, size, number of disk drives, and number of volumes; and utility status, if any.

3. Select a virtual disk.

The selected virtual disk’s volume names, sizes, and types are displayed, and the 
amount of free space.

4. Select the snapshot to delete.

5. Click Delete Snapshot.

When processing is complete, the snapshot is removed from the Volume Menu 
panel. All data uniquely associated with the snapshot is deleted and associated space 
in the snap pool is freed for use.

Viewing Information About Snap Pools, Master 
Volumes, and Snapshots

To view information about all snap pools, master volumes, and snapshots:

1. Select Manage > Volume Management > Snapshot Services > Snapshot Overview.

For each virtual disk, the virtual disk panel shows a status icon; the name, RAID 
level, size, number of disk drives, and number of volumes; and utility status, if any.

2. Select a virtual disk.

The selected virtual disk’s volume names, sizes, and types are displayed, and the 
amount of free space.

Summary of Contents for StorageWorks 2000fc











































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands