manualshive.com logo in svg

HP StorageWorks 2000fc, Reference Manual

Share
Download
HP StorageWorks 2000fc Reference Manual Download Page 86

86

HP StorageWorks 2000 Family Modular Smart Array reference guide • August 2008

Adding a Volume

You must have free space in a virtual disk before you can add a volume. You can 
create free space by deleting a volume (see “Deleting a Volume” on page 93) or by 
expanding the virtual disk (see “Expanding Virtual Disk Capacity” on page 74). You 
can add volumes to a virtual disk until you use all of the free space.

To add a volume:

1. Select Manage > Volume Management > Volume Menu > Add Volume.

For each virtual disk, the virtual disk panel shows a status icon; the name, RAID 
level, size, number of disk drives, and number of volumes; and utility status, if any.

2. Select a virtual disk.

The selected virtual disk’s volume names, sizes, and types are displayed, and the 
amount of free space.

3. Type a size in increments of 1 Mbyte for the new volume.

4. (Optional) Edit the default name for the new volume.

If the virtual disk name has 1–15 characters, the default is 

vdisk-name

_V

number

; 

for example, MyVdisk_V1. If the virtual disk name has 16 or 17 characters, the 

_V

 

is omitted. The name is case sensitive and can include 20 characters, but not 
comma, quotation mark ("), or backslash.

5. (Optional) Change the LUN setting.

■

NONE – The volume is not accessible by connected hosts. This setting is the 
default. You can map the volume to hosts later; see “Managing Volume 
Mappings” on page 99.

■

0–

maximum

 (FC and iSCSI) or 1–

maximum

 (SAS only) – Specifies the LUN that 

all connected hosts can use to access the volume. LUNs already in use are not 
displayed.

6. Click Add Volume.

When processing is complete, the new volume is displayed in the Volume Menu 
panel.

Summary of Contents for StorageWorks 2000fc











































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands