manualshive.com logo in svg

HP StorageWorks 2000fc, Reference Manual

Share
Download
HP StorageWorks 2000fc Reference Manual Download Page 60

60

HP StorageWorks 2000 Family Modular Smart Array reference guide • August 2008

Saving the Configuration to a File

As an Advanced Manage user, you can save the storage system’s configuration 
settings to a file. This enables you to make a backup of your settings in case a 
subsequent configuration change causes a problem, or if you want to apply one 
system’s settings to another system. For information on restoring configuration data, 
see “Restoring a Saved Configuration File” on page 187.

The configuration file contains all system configuration data, including: 

The configuration file does not include configuration data for virtual disks and 
volumes. You do not need to save configuration data for virtual disks and volumes 
before replacing a controller or expansion module because the data is saved as 
metadata in the first sectors of associated disk drives. 

To save system configuration data to a file on the management host or network:

1. Select Manage > Utilities > Configuration Utilities > Save Config File.

2. Click Save Configuration File.

3. If prompted to open or save the file, click Save.

4. If prompted to specify the file location and name, do so, optionally using a 

.config

 extension. 

The default file name is 

saved_config.config

.

Note – 

If you are using Firefox and have a download directory set, the file is 

automatically saved there.

• LAN configuration settings
• Host port configuration settings
• Enclosure management settings
• Disk configuration settings
• Services security settings

• System information settings
• System preferences settings
• System configuration settings
• Event notification settings

Summary of Contents for StorageWorks 2000fc











































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands