HP StorageWorks 2000fc Reference Manual Download Page 143

Page: 143 / 330

Chapter 4

Managing Disk Drives and Enclosures

143

Viewing Enclosure Details

To view enclosure details:

1. Select Manage > General Config > Enclosure Management.

2. Pause your cursor over an enclosure icon.

A pop-up shows the enclosure status and other details.

Entering Enclosure Information

To enter the name, location, rack number, and rack position for an enclosure:

1. Select Manage > General Config > Enclosure Management.

2. If there is more than one enclosure, select the enclosure for which you want to enter

information.

3. Set the following values:

■

Enclosure Name – Type a name to identify the enclosure.

The name can include 19 characters. Allowed characters include letters, numbers,
hyphens, underscores, and spaces.

■

Enclosure Location – Type a description of the enclosure's physical location.

The location can include 19 characters. Allowed characters include letters,
numbers, hyphens, underscores, and spaces.

■

Rack Number – Select a number from 1 to 16 to identify the rack the enclosure is
in.

The default is Not Set.

■

Enclosure Position in Rack – Select a number from 1 to 16 to identify where the
enclosure is positioned in the rack.

The default is Not Set.

By convention, 1 indicates top and 16 indicates bottom.

4. Click Update Enclosure Information.

Summary of Contents for StorageWorks 2000fc











































































































































































































































































































































Search results

Summary of Contents for StorageWorks 2000fc

Reviews:

Brands by name

Popular brands

HP StorageWorks 2000fc, Reference Manual

Search results

Summary of Contents for StorageWorks 2000fc

Reviews:

Brands by name

Popular brands