HP StorageWorks 2/140 - Director Switch, Service Manual

Page: 171 / 396

Repair Information
171 Director 2/140 Service Manual
■
Operating Speed—The operating speed of the port (Not Established, 1, or 2
Gb/sec.).
■
Alert—If Link Incident (LIN) alerts are configured for the port through the
Configure Ports dialog box, a yellow triangle displays in the column when a
link incident occurs. A yellow triangle also displays if beaconing is enabled
for the port. A red and yellow diamond displays if the port fails.
Double-click anywhere in a row for an installed port to open the Port Properties
dialog box.
Right-click anywhere in a row for an installed port to open a menu to:
■
Open the Port Properties, Node Properties, or Port Technology dialog boxes.
■
Block or unblock the port.
■
Enable or disable port beaconing.
■
Perform port diagnostics.
■
Enable or disable port channel wrapping. This menu option displays only
when the director is configured for FICON management style.
■
Swap one Fibre Channel port address with another. This menu option displays
only when the director is configured for FICON management style.
■
Clear link incident alerts.
■
Reset the port.
■
Configure port binding.
■
Clear threshold alerts.
Viewing the Performance View
To view performance data, perform the following:
1. At the Hardware View, click the Performance tab. The Performance View
displays, as shown in Figure 41 .