HP StorageWorks 2/140 - Director Switch, Service Manual

Page: 215 / 396

Repair Information
215 Director 2/140 Service Manual
To reset director data to the factory default settings:
1. Notify the customer the director will be set offline. Ensure the customer’s
system administrator quiesces Fibre Channel frame traffic through the
director and sets attached devices offline.
2. Set the director offline (“ Set Offline State ” on page 201).
3. Open the HAFM application. The View All - HAFM 8 main window displays.
4. Double-click the icon representing the director for which the configuration
file will be reset to factory default settings. The Hardware View for the
selected director displays.
5. Choose Maintenance > Reset Configuration. The Reset Configuration
dialog box displays, as shown in Figure 67 .
Figure 67: Reset Configuration dialog box
6. Click Reset. When the process completes, the dialog box closes and the
application returns to the Hardware View.
7. The director IP address resets to the default address of 10.1.1.10.
— If the configured IP address (prior to reset) was the same as the default
address, the director-to-HAFM appliance Ethernet link is not affected and
the procedure is complete.
— If the configured IP address (prior to reset) was not the same as the default
address, the director-to-HAFM appliance Ethernet link drops and HAFM
appliance communication is lost. Continue to the next step.
8. To change the director IP address and restart the HAFM appliance session, go
to step 10 .
9. To restart an HAFM appliance session using the default IP address of
10.1.1.10:
a. Close the Director 2/140 Element Manager and return to the HAFM
application.
b. A grey square with a yellow exclamation mark displays adjacent to the
icon representing the reset director, indicating the director is not
communicating with the HAFM appliance.