HP StorageWorks 2/140 - Director Switch, Service Manual

Page: 115 / 396

Diagnostics
115 Director 2/140 Service Manual
23
Inspect CTP card operational states at the Embedded Web Server interface.
Inspect the Status fields for both CTP cards.
Does the Status field display a
Failed
message for either CTP card?
NO YES
↓
A CTP card failure is indicated. Go to step 7 .
24
Inspect SBAR assembly operational states at the Embedded Web Server interface.
Inspect the Status fields for both assemblies.
Does the Status field display a
Failed
message for either SBAR assembly?
NO YES
↓
An SBAR assembly failure is indicated. Go to step 9 .
The director is operational. Exit MAP.
MAP 0600: UPM Card Failure and Link Incident Analysis
This MAP describes fault isolation for UPM cards, shortwave laser small form
factor pluggable (SFP) optical transceivers, and longwave laser SFP optical
transceivers; and for Fibre Channel link incidents. Failure indicators include:
■
One or more amber LEDs on the UPM card illuminate.
■
One or more emulated amber LEDs on a UPM card graphic at the Hardware
View illuminate.
■
A blinking red and yellow diamond (failed FRU indicator) displays over a
UPM card graphic or a yellow triangle (attention indicator) displays at the
alert panel of the HAFM main window, Hardware View, or Port Card
View.
■
An event code recorded at the Director 2/140 Event Log or the Embedded
Web Server Event Log.
■
A port operational state message or a
Failed
message associated with a
UPM card at the Embedded Web Server interface.
■
A link incident message recorded in the Link Incident Log or Port Properties
dialog box.