Diagnostics
136
46
Inspect Fibre Channel port operational states at the Embedded Web Server
interface.
1. At the View panel, click the Port Properties tab. The View panel (Port
Properties tab) displays with port 0 highlighted in red.
2. Click the port number (0-127 and 132-143) for which a failure is suspected to
display properties for that port.
3. Inspect the Operational State field. Scroll down the View panel as
necessary.
4.
lists port operational states and associated MAP 0600 steps that
describe fault isolation procedures.
47
Install an SFP optical transceiver in the port receptacle (“
1. This procedure is concurrent and can be performed while director power is on.
2. Verify location of the uninstalled port transceiver.
■
and
show UPM card numbers (0 through15) and port
numbers (0-127 and 132-143) for an OSI environment.
■
and
show UPM card numbers (0 through 15), port
numbers (0-127 and 132-143), and bolded logical port addresses
(hexadecimal 04 through 8F) for a FICON environment.
Table 15: MAP 0600: Port Operational States and Actions
Operational State
Action
Offline
Go to
Not Operational
Go to
Port Failure
Go to
Testing
Internal or external loopback test in process.
Exit MAP.
Invalid Attachment
Go to
Link Reset
Go to
Not Installed
Go to
Summary of Contents for StorageWorks 2/140 - Director Switch
