This manual provides user information for the HP 8360 L-Series
Swept CW Generator.
This manual applies to instruments having a serial number prefix
listed on the title page (behind the “Documentation Map” tab).
Some changes may have to be made to this manual so that it
applies directly to each instrument; refer to Chapter 5, “Instrument
History”, to see what changes may apply to your instrument.
A serial number label (Figure O-l) is attached to the instrument’s
rear panel. A prefix (four digits followed by a letter), and a suffix
(five digits unique to each instrument), comprise the instrument
serial number.
S E R I A L N U M B E R
PREFIX
SUFFIX
S E R
1 2 3 4 A 1 2 3 4 5
I N S T A L L E D
O P T I O N S
Figure O-l. Typical Serial Number Label
Tabs divide the major chapters of this manual. The contents of each
chapter is listed in the Table of Contents.
Documentation Map
For a pictorial representation of the HP 8360 L-Series documentation,
see
the
‘Documentation Map”
at the front of this manual.
Ordering Manuals
A manual part number is listed on the title page of this manual.
You may use it to order extra copies of this manual. See
“Replaceable Parts”
in
HP 8360 B-Series Swept Signal Generator/
HP 8360 L-Series Swept CW Generator Service Guide
for a complete
list of HP 8360 documentation and ordering numbers.
vii
