Save Lock
Function Group
Menu Map
Description
Programming Codes
See Also
SYSTEM
8
This
lets you disable the save function. It prohibits the
saving of the present instrument state into a save/recall memory
register. If this function is active, an error message is displayed. An
asterisk next to the key label indicates that this function is active.
SCPI:
NONE
Analyzer:
SHSV locks the registers, SHRC unlocks the registers.
(SAVE), Security Menu
“Saving and Recalling an Instrument State” in Chapter
1
“Programming Typical Measurements” in Chapter 1
Save User Preset
Function Group
Menu Map
Description
Programming Codes
See Also
SYSTEM
8
This
lets you store the present state of operation to be used
as the PRESET state. Set the swept CW generator to the desired
operating conditions. Select Save User Preset . The display shows:
- -
User Defined Preset Saved
To activate this stored information, you must set the preset mode to
User.
SCPI:
SYSTem:PRESet:SAVE
Analyzer:
NONE
Preset Mode User
“Changing the Preset Parameters” in Chapter 1
S-2 Operating and Programming Reference