Up/Down Power
Function Group
Menu Map
Description
Programming Codes
See Also
POWER
5
This
activates the power step size function. It can be set
from 0.01 to 20
In this mode, power is stepped by the up/down
arrow keys. An asterisk next to the key label indicates this feature is
active.
POWer:STEP[:INC rement]
or
POWer:STEP:AUTO
Analyzer:
SP or SHPL and UP or DOWN
Size
Size Swept
“Programming Typical Measurements” in Chapter
Size CW
Function Group
FREQUENCY
M e n u M a p
Description
This
lets you set the frequency step size for the CW
frequency mode. The step size may be set from 1 Hz to
10
The factory preset size is 100 MHz. CW frequency is
incremented/decremented by pressing the up/down arrow keys.
If an underline cursor appears under a digit in the entry display, then
the value will be modified by the up/down arrow keys or the rotary
knob. The increment/decrement size in this case is the underlined
digit by the power of 10.
If the up/down function is on (asterisk next to key label) and the
cursor is not under one of the active entry area digits, then frequency
value is changed by the up/down size using either the up/down arrow
keys or the rotary knob.
U-2 Operating and Programming Reference