Also
CONNECTORS,
Det Cal
Menu,
(
F L T N E S S O N
/
O F F
) ,
Set
Tracking Menu ,
“Programming Typical Measurements” in Chapter 1
Function Group
POWER
M e n u M a p
Description
This
accesses the power function softkeys.
Menu
Accesses the
in the flatness
correction menu.
Power Offset
Changes the displayed power to
include an offset, but does not change
the output power of the swept CW
generator.
Power Slope
Activates the linear, power-per-frequency
mode of power output, and makes RF
slope (dB/GHz) the active function.
Power Sweep
Activates power sweep mode and makes
power sweep (dB/swp) the active
function.
S e t
Activates uncoupled attenuator as
the mode of operation and makes the
attenuator value the active function.
Tracking Menu
Accesses the
in the tracking
calibration menu.
Uncoupl
Uncouples the attenuator from the ALC
system.
Power
Allows you to enter values for the power
level step size.
All RF power functions except for power level, flatness on/off, and
RF on/off are contained in the power menu.
Operating and Programming Reference P-5
