manualshive.com logo in svg

HP Fabric OS 7.1.0, Administrator'S Manual

Share
Download
HP Fabric OS 7.1.0 Administrator'S Manual Download Page 81

Fabric OS Administrator’s Guide

81

53-1002745-02

Port Identifiers (PIDs) and PID binding overview

3

•

Shared area limitations are removed on 48-port and 64-port blades.

•

Any port on a 48-port or 64-port blade can support up to 256 NPIV devices (in fixed addressing 
mode, only 128 NPIV devices are supported in non-VF mode and 64 NPIV devices in VF mode 
on a 48-port blade).

•

Any port on a 48-port blade can support loop devices.

•

Any port on a 48-port or 64-port blade can support hard port zoning.

•

Port index is not guaranteed to be equal to the port area ID.

256-area addressing mode

This configurable addressing mode is available only in a logical switch on the Brocade Backbone. 
In this mode, only 256 ports are supported and each port receives a unique 8-bit area address. 
This mode can be used in FICON environments, which have strict requirements for 8-bit area 
FC addresses.

There are two types of area assignment modes in the 256-area addressing mode: zero-based and 
port-based. 

•

Zero-based mode assigns areas as ports are added to the logical switch, beginning at area 
0x00. When a port is assigned to a logical switch, the next free PID starting from 0x00 is 
assigned. This mode allows FICON customers to make use of the upper ports of a 48-port or 
64-port blade. 

•

Zero-based mode 

is

 supported on the default switch.

•

Port-based mode is a bit more complex:

•

Port-based mode is 

not

 supported on the default switch.

•

48-port cards are supported in port-based addressing mode (mode 2) on both DCX-4S and 
8510-4 devices. However, the upper 16 ports of a 64-port card are 

not

 supported.The 

Brocade DCX does not support port-based addressing (mode 2) on the FC8-48 blade, but 
does support zero-based addressing (mode 1). 

•

The Brocade DCX-4S supports port-based addressing (mode 2) on the FC8-48 blade. 

•

The Brocade 8510-4 supports port-based addressing (mode 2) on the FC16-48 blade. 

•

The Brocade 8510-8 does not support port based addressing (mode 2) on the FC16-48 
blade, but does support zero-based addressing (mode 1). 

ATTENTION

The DCX and 8510-8 Backbones have safeguards that disable all 49 port cards if FMS is enabled. 

See the 

FICON Administrator’s Guide

 for more details if needed. 

Summary of Contents for Fabric OS 7.1.0



























































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands