manualshive.com logo in svg

HP Fabric OS 7.1.0, Administrator'S Manual

Share
Download
HP Fabric OS 7.1.0 Administrator'S Manual Download Page 261

Fabric OS Administrator’s Guide

261

53-1002745-02

Firmware download on switches

9

Upgrading firmware for Brocade fixed-port switches

1. Take the following appropriate action based on what service you are using:

•

If you are using FTP, SFTP, or SCP, verify that the FTP or SSH server is running on the host 
server and that you have a valid user ID and password on that server.

•

If your platform supports a USB memory device, verify that it is connected and running.

2. Obtain the firmware file from the Brocade website at 

http://www.brocade.com

 and store the 

file on the FTP or SSH server or the USB memory device. 

3. Unpack the compressed files preserving directory structures. 

The firmware is in the form of RPM packages with names defined in a

 .

plist file. The .plist file 

contains specific firmware information and the names of packages of the firmware to be 
downloaded.

4. Connect to the switch and log in using an account with admin permissions.

5. Issue the firmwareShow command to check the current firmware version on connected 

switches. Upgrade the firmware on the connected switches, if necessary, before proceeding 
with upgrading this switch.

Refer to 

“Connected switches”

 on page 259 for details.

6. Enter the firmwareDownload command and respond to the prompts.

NOTE

If DNS is enabled and a server name instead of a server IP address is specified in the 
command line, firmwareDownload determines whether IPv4 or IPv6 should be used.

To be able to mention the FTP server by name, you must enter at least one DNS server using 
the dnsConfig command.

7. At the “Do you want to continue [y/n]” prompt, enter y.

8. After the HA reboot, connect to the switch and log in again using an account with admin 

permissions.

9. Enter the firmwareDownloadStatus command to determine if the firmware download process 

has completed.

10. After the firmware commit is completed, which takes several minutes, enter the firmwareShow 

command to verify the firmware level of both partitions is the same.

Example of an interactive firmware download

switch:root> 

firmwaredownload

Server Name or IP Address: 10.31.2.25
User Name: releaseuser
File Name: /home/SAN/fos/v7.1.0/v7.1.0
Network Protocol(1-auto-select, 2-FTP, 3-SCP, 4-SFTP) [1]: 4
Verifying if the public key authentication is available.Please wait ...
The public key authentication is not available.
Password:
Server IP: 10.31.2.25, Protocol IPv4
Checking system settings for firmwaredownload...

Summary of Contents for Fabric OS 7.1.0



























































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands