manualshive.com logo in svg

HP Fabric OS 7.1.0, Administrator'S Manual

Share
Download
HP Fabric OS 7.1.0 Administrator'S Manual Download Page 358

358

Fabric OS Administrator’s Guide

53-1002745-02

Supported configurations for Traffic Isolation Zoning

12

E-Port Trunks

Trunk members in TI zone: 8
Trunk members not in TI zone: 9 10

E-Port Trunks

Trunk members in TI zone: 16
Trunk members not in TI zone: 17 18

Supported configurations for Traffic Isolation Zoning

The following configuration rules apply to TI zones:

•

Ports in a TI zone must belong to switches that run Fabric OS v6.0.0 or later. For TI over FCR 
zones, all switches and FC routers in both edge and backbone fabrics must be running 
Fabric OS v6.1.0 or later.

•

For the FC8-64 blade in the Brocade DCX and DCX 8510-8, ports 48–63 can be in a TI zone 
only if all switches in that TI zone are running Fabric OS v6.4.0 or later. Ports 48–63 can still be 
in a failover path for TI traffic.
The Brocade DCX-4S and DCX 8510-4 do not have this limitation.

•

VE_Ports are supported in TI zones.

•

TI Zoning is not supported in fabrics with switches running firmware versions earlier than 
Fabric OS v6.0.0. However, the existence of a TI zone in such a fabric is backward-compatible 
and does not disrupt fabric operation in switches running earlier firmware versions. 
TI over FCR is not backward compatible with Fabric OS v6.0.x or earlier. The -1 in the 

domain,index

 entries causes issues to legacy switches in a zone merge. Firmware downgrade 

is prevented if TI over FCR zones exist.

Additional configuration rules for enhanced TI zones

Enhanced TI zones (ETIZ) have the following additional configuration rules:

•

Enhanced TI zones are supported only if every switch in the fabric is ETIZ capable. A switch is 
ETIZ capable if it meets the following qualifications:

-

The switch must be one of the supported platforms, as listed in 

“Supported hardware and 

software”

 on page 34.

-

The switch must be running Fabric OS v6.4.0 or later.

•

If the fabric contains a switch running an earlier version of Fabric OS, you cannot create an 
enhanced TI zone. You cannot merge a downlevel switch into a fabric containing enhanced TI 
zones, and you cannot merge a switch with enhanced TI zones defined into a fabric containing 
switches that do not support ETIZ.

•

Overlapping TI zones must have the same failover type. That is, both must be either failover 
enabled or failover disabled.

NOTE

FC router domains are excluded from the ETIZ platform restrictions. You can create enhanced TI 
zones with these switches in the fabric.

Summary of Contents for Fabric OS 7.1.0



























































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands