manualshive.com logo in svg

HP Fabric OS 7.1.0, Administrator'S Manual

Share
Download
HP Fabric OS 7.1.0 Administrator'S Manual Download Page 338

338

Fabric OS Administrator’s Guide

53-1002745-02

Zone merging

11

•

Merging two fabrics 
Both fabrics have identical zones and configurations enabled, including the default zone 
mode. The two fabrics will join to make one larger fabric with the same zone configuration 
across the newly created fabric.

If the two fabrics have different zone configurations, they will not be merged. If the two fabrics 
cannot join, the ISL between the switches will segment. 

•

Merge conflicts 
When a merge conflict is present, a merge will not take place and the ISL will segment. Use the 
switchShow or errDump commands to obtain additional information about possible merge 
conflicts, because many non-zone related configuration parameters can cause conflicts. See 
the 

Fabric OS Command Reference

 for detailed information about these commands.

If the fabrics have different zone configuration data, the system attempts to merge the two 
sets of zone configuration data. If the zones cannot merge, the ISL will be segmented. 

A merge is not possible if any of the following conditions exist:

-

Configuration mismatch: Zoning is enabled in both fabrics and the zone configurations 
that are enabled are different in each fabric.

-

Type mismatch: The name of a zone object in one fabric is used for a different type of zone 
object in the other fabric.

-

Content mismatch: The definition of a zone object in one fabric is different from the 
definition of zone object with the same name in the other fabric.

-

Zone Database Size: If the zone database size exceeds the maximum limit of another 
switch.

NOTE

If the zoneset members on two switches are not listed in the same order, the configuration is 
considered a mismatch, resulting in the switches being segmented from the fabric. For 
example: 

cfg1 = z1; z2

 is different from 

cfg1 = z2; z1

,

 even though members of the 

configuration are the same. If zoneset members on two switches have the same names 
defined in the configuration, make sure zoneset members are listed in the same order.

Fabric segmentation and zoning

If the connections between two fabrics are no longer available, the fabric segments into two 
separate fabrics. Each new fabric retains the same zone configuration.

If the connections between two fabrics are replaced and no changes have been made to the zone 
configuration in either of the two fabrics, then the two fabrics merge back into one single fabric. If 
any changes that cause a conflict have been made to either zone configuration, then the fabrics 
might segment.

Summary of Contents for Fabric OS 7.1.0



























































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands