manualshive.com logo in svg

HP Fabric OS 7.1.0, Administrator'S Manual

Share
Download
HP Fabric OS 7.1.0 Administrator'S Manual Download Page 225

Fabric OS Administrator’s Guide

225

53-1002745-02

Policy database distribution

7

•

Manually distribute an ACL policy database — Run the distribute command to push the local 
database of the specified policy type to target switches. 

“ACL policy distribution to other 

switches”

 on page 227.

•

Fabric-wide consistency policy — Use to ensure that switches in the fabric enforce the same 
policies. Set a strict or tolerant fabric-wide consistency policy for each ACL policy type to 
automatically distribute that database when a policy change is activated. If a fabric-wide 
consistency policy is not set, then the policies are managed on a per switch basis. For 
configuration instructions, see 

“Fabric-wide enforcement”

 on page 227.

Virtual Fabric considerations: Fabric-wide consistency policies are configured on a per logical 
switch-basis and are applied to the fabrics connected to the logical switches. Automatic policy 
distribution behavior for DCC, SCC and FCS is the same as that of pre-v6.2.0 releases and are 
configured on a per logical switch basis.

Table 40

 on page 225 explains how the local database distribution settings and the fabric-wide 

consistency policy affect the local database when the switch is the target of a distribution 
command.

Database distribution settings

The distribution settings control whether a switch accepts or rejects distributions of databases 
from other switches and whether the switch may initiate a distribution. Configure the distribution 
setting to reject when maintaining the database on a per-switch basis. 

Table 41

 lists the databases supported in Fabric OS v6.2.0 and later switches.

TABLE 40

Interaction between fabric-wide consistency policy and distribution settings

Distribution 
setting

Fabric-wide consistency policy

Absent (default)

Tolerant

Strict

Reject

Database is protected, it 
cannot be overwritten. 
May not match other 
databases in the fabric.

Invalid configuration.

1

1.

An error is returned indicating that the distribution setting must be accept before you can set the fabric-wide 

consistency policy.

Invalid configuration.

1

Accept (default) Database is not protected, 

the database can be 
overwritten.
If the switch initiating a 
distribute command has a 
strict or tolerant fabric-wide 
consistency policy, the 
fabric-wide policy is also 
overwritten.
May not match other 
databases in the fabric.

Database is not protected. 
Automatically distributes 
activated changes to other 
v6.2.0 or later switches in the 
fabric.
May not match other 
databases in the fabric.

Database is not protected.
Automatically distributes 
activated changes to all 
switches in the fabric.
Fabric can only contain 
switches running Fabric OS 
v6.2.0 or later.
Active database is the same for 
all switches in the fabric.

TABLE 41

Supported policy databases 

Database type

Database identifier (ID)

Authentication policy database

AUTH

DCC policy database

DCC

Summary of Contents for Fabric OS 7.1.0



























































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands