manualshive.com logo in svg

HP Fabric OS 7.1.0, Administrator'S Manual

Share
Download
HP Fabric OS 7.1.0 Administrator'S Manual Download Page 422

422

Fabric OS Administrator’s Guide

53-1002745-02

Enabling and disabling NPIV

15

VC Link Init              OFF
Locked L_Port             OFF
Locked G_Port             OFF
Disabled E_Port           OFF
Locked E_Port             OFF
ISL R_RDY Mode            OFF
RSCN Suppressed           OFF
Persistent Disable        OFF
LOS TOV enable            OFF
NPIV capability           ON
QOS E_Port                AE
Port Auto Disable:        OFF
Rate Limit                OFF
EX Port                   OFF
Mirror Port               OFF
Credit Recovery           ON
F_Port Buffers            OFF
Fault Delay:              0(R_A_TOV)
NPIV PP Limit:            128
CSCTL mode:               OFF
Frame Shooter Port        OFF
D-Port mode:              OFF
Compression:              OFF
Encryption:               OFF
FEC:                      ON

Enabling and disabling NPIV

On the Brocade 300, 5100, 5300, 6505, 6510, 6520, 7800, and 8000 switches, the Brocade 
5410, 5424, 5430, 5450, 5460, 5470, and 5480 embedded switches, Brocade DCX and DCX 
8510 Backbone families, and the FA4-18 blade, NPIV is enabled for every port.

NOTE

NPIV is a requirement for FCoE. The CEE/FCoE ports on the Brocade 8000 have NPIV enabled by 
default, but NPIV cannot be enabled or disabled on these ports. The login limit can be set on these 
ports provided you disable and enable the ports using the fcoe

 

--

disable and fcoe

 

--

enable 

commands.

1. Connect to the switch and log in using an account assigned to the admin role. 

2. To enable or disable NPIV on a port, enter the portCfgNPIVPort command with either the 

--

enable or 

--

disable option.

The following example shows NPIV being enabled on port 10 of a Brocade 5100:

switch:admin> 

portCfgNPIVPort --enable 10

NOTE

If the NPIV feature is disabled, the port is toggled if NPIV devices are logged in from that F_Port (a 
true NPIV port). Otherwise, the firmware considers that port as an F_Port even though the NPIV 
feature was enabled.

Summary of Contents for Fabric OS 7.1.0



























































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands