manualshive.com logo in svg

HP Fabric OS 7.1.0, Administrator'S Manual

Share
Download
HP Fabric OS 7.1.0 Administrator'S Manual Download Page 200

200

Fabric OS Administrator’s Guide

53-1002745-02

FCS policies

7

Table 30

 shows the commands for switch operations for Primary FCS enforcement.

In Fabric OS v7.1.0 and later, to avoid segmentation of ports due to a member-list order mismatch, 
security policy members are sorted based on WWN. By default, DCC and SCC policy members are 
sorted based on WWN. Switches running earlier Fabric OS versions will have the member list in the 
unsorted manner. Any older-version switch with a policy already created in unsorted order will have 
port segmentation due to order mismatch when attempting to join any switch with Fabric OS v7.1.0 
or later. To overcome the order mismatch, you can modify the member list in the switch by using the 

-legacy 

option. For more information about using the 

-legacy

 option in the secPolicyAdd and 

secPolicyCreate commands, refer to 

Fabric OS Command Reference, Supporting Fabric OS, v7.1.0

.

Ensuring fabric domains share policies 

Whether your intention is to create new FCS policies or manage your current FCS policies, you must 
follow certain steps to ensure the domains throughout your fabric have the same policy.

The local-switch WWN cannot be deleted from the FCS policy. 

1. Create the FCS policy using the secPolicyCreate command.

2. Activate the policy using the secPolicyActivate command.

If the command is not entered, the changes are lost when the session is logged out. 

3. To distribute the policies, enter the distribute -p 

policy_list

 -d

switch_list

 command to either 

send the policies to intended domains, or enter the distribute -p 

policy_list

 -d

wild_card (*)

 

command to send the policies to all switches. 

TABLE 30

FCS switch operations 

Allowed on FCS switches

Allowed on all switches

secPolicyAdd (Allowed on all switches for SCC and DCC 
policies as long as it is not fabric-wide)

secPolicyShow

secPolicyCreate (Allowed on all switches for SCC and 
DCC policies as long as it is not fabric-wide)

fddCfg 

–-

localaccept or fddCfg

 

--

localreject

secPolicyDelete (Allowed on all switches for SCC and 
DCC policies as long as its not fabric-wide)

userconfig, Passwd, Passwdcfg (Fabric-wide distribution 
is not allowed from a backup or non-FCS switch.)

secPolicyRemove (Allowed on all switches for SCC and 
DCC policies as long as its not fabric-wide)

secPolicyActivate

fddCfg 

–-

fabwideset

secPolicySave

Any fabric-wide commands

secPolicyAbort

All zoning commands except the show commands

SNMP commands

All AD commands 

configupload

Any local-switch commands

Any AD command that does not affect fabric-wide 
configuration

Summary of Contents for Fabric OS 7.1.0



























































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands