manualshive.com logo in svg

HP Fabric OS 7.1.0, Administrator'S Manual

Share
Download
HP Fabric OS 7.1.0 Administrator'S Manual Download Page 227

Fabric OS Administrator’s Guide

227

53-1002745-02

Policy database distribution

7

ACL policy distribution to other switches

This section explains how to manually distribute local ACL policy databases. The distribute 
command has the following dependencies:

•

All target switches must be running Fabric OS v6.2.0 or later.

•

All target switches must accept the database distribution (see 

“Database distribution settings”

 

on page 225).

•

The fabric must have a tolerant or no (absent) fabric-wide consistency policy (see 

“Fabric-wide 

enforcement”

 on page 227).

If the fabric-wide consistency policy for a database is strict, the database cannot be manually 
distributed. When you set a strict fabric-wide consistency policy for a database, the distribution 
mechanism is automatically invoked whenever the database changes.

•

The local distribution setting must be accepted. To be able to initiate the distribute command, 
set the local distribution to accept.

Distributing the local ACL policies

1. Connect to the switch and log in using an account with admin permissions, or an account with 

OM permissions for the FabricDistribution RBAC class of commands.

2. Enter the distribute -p command.

Fabric-wide enforcement

The fabric-wide consistency policy enforcement setting determines the distribution behavior when 
changes to a policy are activated. Using the tolerant or strict fabric-wide consistency policy ensures 
that changes to local ACL policy databases are automatically distributed to other switches in the 
fabric.

NOTE

To completely remove all policies from a fabric enter the fddCfg

 

--

fabwideset "” command. 

When you set the fabric-wide consistency policy using the fddCfg command with the 

--

fabwideset

database_id

 

option, both the fabric-wide consistency policy and specified database 

are distributed to the fabric.The active policies of the specified databases overwrite the 
corresponding active and defined policies on the target switches.

Policy changes that are saved but not activated are stored locally until a policy database change is 
activated. Activating a policy automatically distributes the Active policy set for that policy type (SCC, 
DCC, FCS, or any combination of the three) to the other switches in the fabric.

NOTE

FC routers cannot join a fabric with a strict fabric-wide consistency policy. FC routers do not support 
the fabric-wide consistency policies.

Table 42

 describes the fabric-wide consistency settings.

Summary of Contents for Fabric OS 7.1.0



























































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands