HP DESIGNJET 3D, Service Manual

Page: 394 / 458

-378
Figure 389: Measuring diameter of circle E
29. Add the lengths derived from steps 26 and 27 (C-E and E-G) and then
subtract the width of circle E derived from step 28. Record this total as
“Left Rear”
30. Measure and record the distance from the outside edge of circle A to the
outside edge of circle E. See Figure 390
Figure 390: Measuring distances from outside edges of A and E
31. Measure and record the distance from the outside edge of circle E to the
outside edge of circle I. See Figure 391