HP DESIGNJET 3D, Service Manual

Page: 367 / 458

-351
31. Press the
GRight
button. Enter the value recorded from step
17
by press-
ing the
Increment
,
Decrement
and
Next Digit
buttons.
32. When finished, press
Done...
33. Press the
GFront
button. Enter the value recorded from step
12
by press-
ing the
Increment
,
Decrement
and
Next Digit
buttons.
34. When finished, press
Done...
35. Press the
Next...
button.
36. Press the
GRear
button. Enter the value recorded from step
16
by press-
ing the
Increment
,
Decrement
and
Next Digit
buttons.
37. When finished, press
Done...
38. Press the
GLF
button. Enter the value recorded from step
26
by pressing
the
Increment
,
Decrement
and
Next Digit
buttons.
39. When finished, press
Done...
40. Press the
GLR
button. Enter the value recorded from step
22
by pressing
the
Increment
,
Decrement
and
Next Digit
buttons.
41. When finished, press
Done...
42. Press the
Next...
button until you reach the last page.
43. Press the
Done...
button.
44. Press the
Save and reboot
button.
45. The printer will reboot and return to idle.
46. Build a sample part to verify proper operation.
NOTE: The value for GRight must be between 5.250” and 5.750”.
NOTE: The value for GFront must be between 7.250” and 7.750”.
NOTE: The value for GRear must be between 7.250” and 7.750”.
NOTE: The value for GLF must be between 9.051” and 9.551”.
NOTE: The value for GLR must be between 9.051” and 9.551”.