-248
Figure 194: Head board connector location
7. Disconnect the umbilical cable from the TC Amp board by pressing in
on the tab and pulling outward. See
Figure 195: TC Amp connector location
8. Feed the umbilical cable out through the energy chain.
Installing the umbilical cable
1. Feed the umbilical cable through the energy chain.
2. Reconnect the umbilical cable to the TC Amp board.
3. Reconnect the umbilical cable to the head board.
4. Reconnect the umbilical cable to the I/O card.
5. Reinstall the umbilical hose. See
“Installing the umbilical hose” on
6. Reinstall the upper electronics bay cover. See
tronics bay cover” on page 174
7. Reinstall the side panels. See
“Installing the side panels” on page 164
8. Reinstall the top panel. See
“Installing the top panel” on page 162
Disconnect the
umbilical cable
Disconnect the
umbilical cable
Summary of Contents for DESIGNJET 3D
