-360
Performing part based calibration for HP Designjet Color 3D from the
Service Calibration menu (Firmware version 9.1 or newer)
1. While the printer is at
Idle
, enter standby mode by pressing the
Standby...
button.
2. Enter the Service Calibration menu by pressing the following button
sequence on the display panel:
3,2,3,3,1
. See
Figure 354: Service Calibration button sequence
3. Press the
Reset Part Based Calibration
button.
4. The printer will ask “Do you want to zero settings and reboot?” Press
Yes
.
5. Reboot the printer.
6. Once the system displays Idle, press
Maintenance>System>Test Parts
then
select
the
test_XY_cal
part.
7. When part is completed, remove from printer and let cool for five min-
utes.
8. Locate the filled circle, this indicates the front of the substrate, see
Button 0
Button 1
Button 2
Button 3
Summary of Contents for DESIGNJET 3D
