HP DESIGNJET 3D, Service Manual

Page: 391 / 458

-375
Figure 382: Measuring distances from outside edges of D and G
20. Measure and record the diameter of circle D along the center line
between A and G. See Figure 383
Figure 383: Measuring diameter of circle D
21. Add the lengths derived from steps 18 and 19 (A-D and D-G) and then
subtract the width of circle D derived from step 20. Record this total as
“Left”
22. Measure and record the distance from the outside edge of circle G to
the outside edge of circle H. See Figure 384
Figure 384: Measuring distances from outside edges of G and H