-80
5. Press
Head.
The head will heat up to operating temperature which will
take approximately 3 minutes.
6. Press
Select Drive
and choose the drive that may have the clogged tip.
7. Press
Forward
, the drive wheel will turn the selected drive forward.
8. Press
Blower Off
, this will turn the head cooling fan off for 10 seconds,
allowing the tip to heat up beyond operating temperature. If material
starts to extrude the tip is no longer clogged. If material does not
extrude see
“Recovering from loss of extrusion” on page
9. Press
Done
.
10. Display will ask
Which Materials Loaded?
Press
Both.
11. Press
Done
until back to
Idle
.
Material Jam
Occasionally, material may become jammed in the head. The printer will
notify you of a material jam through a message shown on the display panel.
If a material jam is detected, follow these steps to clear the jam.
1. From the display panel, press
Continue
.
2. Press
Maintenance
.
3. Press
Machine
.
4. Press
Head
.
5. Once in head maintenance mode, remove the head cover by pressing
the tabs in and pulling away from the head. See
Figure 57: Remove the head cover
GLOVES: The head area is hot. Use gloves when working in this
area of printer.
Press tabs in to
remove head
cover
Head Cover
Summary of Contents for DESIGNJET 3D
