![background image](http://html.mh-extra.com/html/pitney-bowes/e725/e725_instructions_1559864001.webp)
INSTRUCTIONS FOR PRINT HEAD CLEAN
•
The cart must weigh 30 grams or more must be effective. If the cartridge
weighs less than 30 grams, please install a replacement.
•
To continue with a full print head clean, unplug the meter from the mains and
obtain a damp and dry tissue. PLEASE DO NOT USE COTTON
WOOL/BUD OR SCREEN WET WIPE
•
Lift the meter lid and slide the ink cartridge carriage from the right hand
location into the middle of the machine
•
Lift the blue section (ink cartridge latch) by squeezing the tabs on each side.
Remove the ink cartridge and put to one side Please ensure that the ink
cartridge is placed Pitney Bowes label down on a scrap of paper so as not to
damage furniture
•
Squeeze the release tabs situated at the rear of the black section and gently
pivot forward.
a.
b.
•
Please take note of the correct positioning of the white cable.