![background image](http://html.mh-extra.com/html/epson/nx415-stylus-color-inkjet/nx415-stylus-color-inkjet_start-here-manual_105825001.webp)
*411615700*
*411615700*
If anything is missing, contact Epson as described on the back.
Note:
The model name of your product may vary slightly from the one shown above.
The included CD and documentation apply to all products in the series.
Caution:
Do not open ink cartridge packages until you are ready to install the ink.
Cartridges are vacuum packed to maintain reliability.
Canada only:
For French speakers, remove stickers from the backing sheet and place
over corresponding text on the control panel.
Remove all protective materials.
Unpack
1
Start Here
Select your language
3
Press
or
to select to select your language, then press
OK
.
Language
3
Flip the feeder guard forward, then squeeze the edge guide and slide it
left.
4
Load paper against the right edge and behind the tab, with the printable
side face up.
4 6
8½ 11
Note:
Don’t load the paper sideways; always load it short edge first.
5
Slide the edge guide over.
1
Connect the power cable.
Caution:
Do not connect to your computer yet.
2
Press the
On
button.
Note:
You can raise the LCD display screen for better viewing, if necessary.
Turn on the printer
2
(Included for Canada only)
Install ink cartridges
4
Note:
Do not load paper yet.
1
Lift up the scanner, then open the cartridge cover.
2
Shake the ink cartridges gently 4 or 5 times, then unpack them.
3
Remove only the yellow tape from each cartridge.
Caution:
Do not remove any other seals or the cartridge may leak.
4
Insert the cartridges in the holder for each color.
5
Press each cartridge down until it clicks.
6
Close the cartridge cover. Press down until it clicks.
7
Lower the scanner.
8
Press the
OK
button to charge the ink. Charging takes about 2 minutes.
Note:
Your printer ships with full cartridges and part of the ink from the first
cartridges is used for priming the printer.
Caution:
Don’t turn off the printer while it is charging or you’ll waste ink.
1
Open the paper support and pull up the extensions.
2
Open the output tray, pull out the extensions, and raise the stopper.
Note:
Do not raise the stopper for legal-size paper.
5
Load paper
Series