Home
/
HP
/
49g+
/
User Manual

HP 49g+, User Manual, Page: 802 / 862

Share

Page: 802 / 862

HP 49g+ User Manual Download Page 802

Page C-10

When the

_Rigorous

CAS option is selected, the algebraic expression

|X|,

i.e., the absolute value, is not simplified to

X

. If the

_Rigorous

CAS option is

not selected, the algebraic expression

|X|

is simplified to

X

.

The CAS can solve a larger variety of problems if the rigorous mode is not set.
However, the result, or the domain in which the result are applicable, might
be more limited.

Simplify non-rational CAS setting

When the

_Simp Non-Rational

CAS option is selected, non-rational

expressions will be automatically simplified. On the other hand, if the

_Simp

Non-Rational

CAS option is not selected, non-rational expressions will not be

automatically simplified.

Using the CAS HELP facility

Turn on the calculator, and press the

I

key to activate the TOOL menu.

Next, press the

B

soft menu key, followed by the

`

key (the key in the

lowest right corner of the keyboard), to activate the HELP facility. The display
will look as follows:

At this point you will be provided with a list of all CAS commands in
alphabetical order. You can use the down arrow key,

˜

, to navigate

through the list. To move upwards in the list use the up arrow key,

—

. The

arrow keys are located on the right-hand side of the keyboard between the
first and fourth rows of keys.

Suppose that you want to find information on the command ATAN2S
(ArcTANgent-to-Sine function). Press the down arrow key,

˜

, until the

command ATAN2S is highlighted in the list:

«
...
800
801
802
803
804
...
»

Summary of Contents for 49g+































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments