HP 49g+ User Manual Download

Page: 724 / 862

Page 22-12

The PTYPE menu within STAT (I)

The PTYPE menu provides the following functions:

These keys correspond to the plot types

Bar (A), Histogram (B),

and

Scatter(C)

presented earlier. Pressing one of these soft menu keys, while typing a
program, will place the corresponding function call in the program. Press

@)STAT

to get back to the STAT menu.

The DATA menu within STAT (II)

The DATA menu provides the following functions:

The functions listed in this menu are used to manipulate the

DAT statistical

matrix. The functions

+ (D) and

- (E), add or remove data rows from the

matrix

DAT. CL

(F) clears the

DAT (G) matrix, and the soft menu key

labeled

DAT is just used as a reference for interactive applications. More

details on the use of these functions are presented in a later chapter on
statistical applications. Press

@)STAT

to return to the STAT menu.

The

PAR menu within STAT (III)

The

PAR menu provides the following functions:

INFO (M) and

PAR (K)

The key INFO in

PAR provides the information shown in the screen shot

above. The information listed in the screen is contained in the variable

PAR.

The values shown are the default values for the x-column, y-column, intercept

Summary of Contents for 49g+































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 49g+

Reviews:

Related manuals for 49g+

Brands by name

Popular brands

HP 49g+, User Manual

Search results

Summary of Contents for 49g+

Reviews:

Related manuals for 49g+

Brands by name

Popular brands