manualshive.com logo in svg

HP 49g+, User Manual, Page: 140 / 862

Share
Download
HP 49g+ User Manual Download Page 140

 

 

Page 3-18 

For extensive operations with units SOFT menus provide a more convenient 
way of attaching units.   Change system flag 117 to SOFT menus (see 
Chapter 1), and use the keystroke combination 

‚Û

 to get the following 

menus.  Press 

L

 to move to the next menu page. 

 

    

 

 

 

Pressing on the appropriate soft menu key will open the sub-menu of units for 
that particular selection.  For example, for the 

@)SPEED

 sub-menu, the following 

units are available: 

    

 

 

Pressing the soft menu key 

@)UNITS

 will take you back to the UNITS menu. 

 
Recall that you can always list the full menu labels in the screen by using 

‚˜

, e.g., for the 

@)ENRG

 set of units the following labels will be listed: 

    

 

 

Note: 

Use the 

L

 key or the 

„«

keystroke sequence to navigate 

through the menus. 
 

Available units 

The following is a list of the units available in the UNITS menu.  The unit 
symbol is shown first followed by the unit name in parentheses: 
 

LENGTH 

m (meter), cm (centimeter), mm (millimeter), yd (yard), ft (feet), in (inch), Mpc 
(Mega parsec), pc (parsec), lyr (light-year), au (astronomical unit), km 
(kilometer), mi (international mile), nmi (nautical mile), miUS (US statute mile), 

Summary of Contents for 49g+































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments