HP 49g+ User Manual Download Page 276

Page: 276 / 862

Page 9-5

Activate the Matrix Writer again by using

„²

, and press

to check

out the second soft key menu at the bottom of the display. It will show the
keys:

@+ROW@ @-ROW @+COL@ @-COL@

→

STK@@ @GOTO@

The

@+ROW@

key will add a row full of zeros at the location of the

selected cell of the spreadsheet.
The

@-ROW

key will delete the row corresponding to the selected cell of

the spreadsheet.
The

@+COL@

key will add a column full of zeros at the location of the

selected cell of the spreadsheet.
The

@-COL@

key will delete the column corresponding to the selected

cell of the spreadsheet.
The

→

STK@@

key will place the contents of the selected cell on the stack.

The

@GOTO@

key, when pressed, will request that the user indicate the

number of the row and column where he or she wants to position the
cursor.

Pressing

once more produces the last menu, which contains only one

function

@@DEL@

(delete).

The function

@@DEL@

will delete the contents of the selected cell and

replace it with a zero.

To see these keys in action try the following exercise:
(1) Activate the Matrix Writer by using

„²

. Make sure the

@VEC

and

@GO

→

keys are selected.

(2) Enter the following:

1`2`3`

@GOTO@

@@OK@@

@@OK@@ @@OK@@

2`1`5`

4`5`6`

7`8`9`

(3) Move the cursor up two positions by using

———

. Then press

@-ROW

The second row will disappear.

(4) Press

@+ROW@

. A row of three zeroes appears in the second row.

Summary of Contents for 49g+































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 49g+

Reviews:

HP 49g+, User Manual, Page: 276 / 862

Search results

Summary of Contents for 49g+

Reviews: