MAINTENANCE
3-14
Check that the O-
ring is in good
condition, replace if
necessary.
Apply engine oil to the timing hole cap O-ring.
Apply grease to the timing hole cap threads.
Install and tighten the timing hole cap to the speci-
fied torque.
Remove the cam chain tensioner stopper tool.
Install a new sealing washer and cam chain ten-
sioner lifter sealing bolt.
Tighten the bolt securely.
Install the cylinder head cover (page 8-31).
ENGINE OIL/OIL FILTER
OIL LEVEL INSPECTION
Place the motorcycle on the level ground with its
sidestand.
Start the engine and let it idle for 3 – 5 minutes.
Stop the engine and wait 2 – 3 minutes.
Hold the motorcycle in an upright position.
Check the oil level through the inspection window.
If the level is below the lower level line, fill the
crankcase with the recommended oil up to the
upper level line as following procedures.
Remove the oil filler cap.
TORQUE: 18 N·m (1.8 kgf·m, 13 lbf·ft)
TIMING HOLE CAP
O-RING
SEALING WASHER
BOLT
CAM CHAIN TENSIONER LIFTER
INSPECTION WINDOW
UPPER LEVEL LINE
LOWER LEVEL LINE
OIL FILLER CAP
Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys.
email: [email protected]