CLUTCH/STARTER CLUTCH/GEARSHIFT LINKAGE
9-24
INSTALLATION
Apply a locking agent to the stopper arm pivot bolt
threads.
Install the following:
– washer
– return spring
– stopper arm
– pivot bolt
Tighten the stopper arm pivot bolt to the specified
torque.
Install the dowel pin onto the shift drum.
Install the gearshift cam while holding the stopper
arm using a screwdriver as shown.
Apply a locking agent to the shift drum center
socket bolt threads.
Tighten the socket bolt to the specified torque.
Install the thrust washer and gearshift spindle
assembly into the crankcase while aligning the
spring ends with the crankcase stopper pin.
TORQUE: 12 N·m (1.2 kgf·m, 9 lbf·ft)
STOPPER ARM
WASHER
PIVOT BOLT
RETURN SPRING
Align the dowel pin
on the shift drum
with the wide
groove on the
gearshift cam.
WIDE GROOVE
DOWEL PIN
GEARSHIFT CAM
TORQUE: 23 N·m (2.3 kgf·m, 17 lbf·ft)
SOCKET BOLT
GEARSHIFT SPINDLE
THRUST WASHER
Align
Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys.
email: [email protected]