Hitachi UX Twin-Nozzle Technical Manual Download Page 103

Page: 103 / 161

●

Communication Monitor Function 5-61

(3) Explanation of USB output function.

●

When you press the USB output button, the Communication description which is displayed on screen can

be output to a USB memory.

●

The Communication description which is displayed on screen can be output to a USB memory.

when "Comm. monitor"screen is displayed AND Comm. monitor is in "Halted" status.

●

The Communication description is output in a Text file format.

●

Explanation of file composition and file name.

・

UXCLOG holder is automatically created right below the USB memory.

・

The Communication description is output in the name of LOG_Serial number_YYMMDDhhmmss.txt

right below the UXCLOG holder.

USB Memory

UXCLOG

LOG_Serial number_YYMMDDhhmmss.txt

YYMMDDhhmmss stands
for Year, Month, Date, Hour,
Minute and Second.

●

Explanation of content of output.

・

A Target port is output in the lead, such as "Standard" for the standard port and "Secondary" for the

expansion port.

・

Compositions of the Text file are output in the order of No., Trans, and Communication description.

(No.: 4 digit number; Trans.: "S" for sending and "R" for receiving.)

・

An asterisk (*) is output in front of the error part when an error was detected.

(Example of output text file)

Standard
0001,R,05,
0002,S,06,
0003,R,02,10,31,41,42,43,44,45,10,32,31,32,33,34,35,03,
0004,S,06,
0005,R,05,
0006,S,06,
0007,R,02,10,31,41,42,43,44,45,10,32,31,32,33,34, *7F, 03,
0008,S,15,

A Target port is output.

It is an error part.

Trans. is output with "S" for sending and "R" for receiving.

No. is output in 4 digit number.

●

Explanation of content of notes.

・

The data is NOT output by pressing the USB output button if the Communication description does NOT

Exist.

・

The data is NOT output by pressing the USB output button when the Line monitor is in operation.

・

<USB Memory Error> is displayed when the USB memory is NOT installed on the IJP.

・

<USB Memory Error> is displayed when the USB memory runs out of its capacity.

・

The data is overwritten if the same file name already exists in the USB memory.

・

Do NOT remove the USB memory when the USB data output is in process.

Summary of Contents for UX Twin-Nozzle
































































































































































Search results

Summary of Contents for UX Twin-Nozzle

Reviews:

Related manuals for UX Twin-Nozzle

Brands by name

Popular brands

Hitachi UX Twin-Nozzle, Technical Manual

Search results

Summary of Contents for UX Twin-Nozzle

Reviews:

Related manuals for UX Twin-Nozzle

Brands by name

Popular brands