![background image](http://html.mh-extra.com/html/hitachi/ux-twin-nozzle/ux-twin-nozzle_technical-manual_143810129.webp)
●
How to correct ink stream bending and nozzle clogging 6-16
Press the Ink stream 1 alignment
→
Start/Continue and confirm that bending
of the stream and clogging of the nozzle have been repaired.
●
Perform this operation with the tip of the print head inserted into a beaker.
●
When the ink stream is way outside the gutter, cleaning of the nozzle orifice may not be sufficient.
Disassemble and clean the nozzle orifice again.
●
When the ink stream position has deviated from the center of the gutter, adjust it in accordance
with par. “6.5 Stream alignment”.
4