![background image](http://html.mh-extra.com/html/hitachi/ux-twin-nozzle/ux-twin-nozzle_technical-manual_143810132.webp)
6-19
●
Cleaning the Gutter
2018.07.07 12:45
Circulation control
[Service
]
Function
:
Gutter cleaning
Proc. status:
Proc. time
:
Approx. 1 minute.
Use the cleaning bottle to sprinkle makeup
over the gutter.
Operation guide
Drawing
Com=0
6.6 Cleaning the Gutter
●
When the ink recovery system becomes dry or clogged, the line from the gutter to the ink main tank can be
cleaned by performing “Gutter cleaning”.
●
Do not perform this operation while ink is being ejected. Perform it after setting the IJ printer to the “Stop”
state.
●
Have ready a cleaning bottle filled with makeup and a beaker and remove the print head cover.
●
If recovery-line cleaning is performed continuously, the ink will become thin and cause printing distortion.
Since ink replacement may become necessary after repair, do not perform cleaning more than total 2
consecutive times on both of the Nozzles.
●
Do not pour makeup onto the opposite gutter which is not to be cleaned, because the makeup on both of the
gutters may be sucked in this operation.
Display the Circulation control screen and press the Gutter cleaning
→
Start/Continue .
1
Perform cleaning in accordance with the operation guide.
2
●
Pour makeup onto the gutter.
●
To stop operation, press Abort .
Cleaning ends in about 1 minute and the screen returns to the Circulation
control screen.
3
Cleaning bottle
Gutter
Beaker