●
Long-term Shutdown 6-42
Process : Process prior to
long-term shutdown
Insert the nozzle of the cleaning bottle in the Supply Port and inject
approximately 100ml of makeup in the ink reservoir.
When ready, press <Start/Continue> button.
Operation guide
Proc. status:
Circulation control
[Service
]
2018.07.07 12:45
A InkDra.
Systemclean
InkDrainage
Systemclean
InkDrainage
↓
Com=0
Abort
Start/
Continue
(a) Insert the nozzle of the cleaning bottle in the supply port and Inject approximately
150ml of makeup int the ink reservoir..
If ink is accidentally spilt, wipe it up
promptly with wiping paper or
equivalent.
In addition, do not close the
maintenance cover until you are
sure that the wiped area is
completely dried.
CAUTION
(b) Press Start/Continue .
●
Cleaning in the circulation system starts.
Cleaning bottle
Supply port
Clean the circulation system.
●
Perform operation in accordance with the operation guide on the screen.
5
Release the ink-side Lock Pin and remove the empty ink cartridge bottle.
Wipe the pipe surface of the ink reservoir up using wiping paper dampened
with makeup.
Be careful not to damage the pipe.
4
Pipe
Start/Continue
