Rev. 3.0, 04/02, page 914 of 1064
22.4.4
Endian Control in Target Transfers (Memory Read/Memory Write)
In target transfers, for memory read and memory write that perform data transfer between the local
bus and the PCI bus, big/little endian conversion is required in the same way as for DMA transfers
when the local bus is set for big endians. Word/longword boundary modes are not supported in the
case of target transfers. As shown in table 22.12, the byte data boundary mode is used, instead of
ALNMD, for all transfers.
The access sizes supported in the case of target transfers are as follows: For target reads (local bus
to PCI bus), longword only. For target writes (PCI bus to local bus), longword/word/byte. In target
write operations, the byte, word and longword data in the PCIC are transferred to the local bus in
one or two transfer operations depending on the type of the byte enable signal of the PCI bus.
For example, when C/
= b'1010, byte access to the local bus is generated twice. When C/ =
b'1000, byte access and word access are each generated once.
Table 22.12 Target Transfer Access Size and Endian Conversion Mode
Endian Conversion Mode
Local Bus
Endian
Data Transfer
Direction
Access
Size
W/LW Boundary
Mode (1 to 3)
Byte Data Boundary
Mode
Big endian
Target read
LW
No
Yes
Target write
B, W, LW
No
Yes
Little endian
Target read
LW
Target write
B, W, LW
Conversion not
required
Conversion not
required
Summary of Contents for SH7751
