Performing CCI Operations
1–69
Hitachi AMS 2000 Family Command Control Interface (CCI) Reference Guide
•
Options
(continued)
If HORCMINST is specified:
HORCM_CONF = /etc/horcm*.conf (* is instance number)
HORCM_LOG
= /HORCM/log*/curlog
HORCM_LOGS = /HORCM/log*/tmplog
If no HORCMINST is specified:
HORCM_CONF = /etc/horcm.conf
HORCM_LOG
= /HORCM/log/curlog
HORCM_LOGS = /HORCM/log/tmplog
For Windows 2000 platform:
If HORCMINST is specified:
HORCM_CONF = \WINNT\horcm*.conf (* is instance number)
HORCM_LOG
= \HORCM\log*\curlog
HORCM_LOGS = \HORCM\log*\tmplog
If no HORCMINST is specified:
HORCM_CONF = \WINNT\horcm.conf
HORCM_LOG
= \HORCM\log\curlog
HORCM_LOGS = \HORCM\log\tmplog
For Windows Server platform:
If HORCMINST is specified:
HORCM_CONF = \WINDOWS\horcm*.conf (* is instance number)
HORCM_LOG
= \HORCM\log*\curlog
HORCM_LOGS = \HORCM\log*\tmplog
If no HORCMINST is specified:
HORCM_CONF = \WINDOWS\horcm.conf
HORCM_LOG
= \HORCM\log\curlog
HORCM_LOGS = \HORCM\log\tmplog
Note 1: The HORCM_LOGS environment variable is used to specify
the log file directory for automatic storing. When HORCM starts up, the
log files created in the operation are stored automatically in the
HORCM_LOGS directory. This log directory must give an equality class
with HORCM_LOG.
Note 2: The HORCMSTART_WAIT environment variable waits until
HORCM becomes ready for use. However, this time may take longer
than usual depending the operating system, HBA driver, or command
device. As a result, a time-out may occur exceeding this waiting time
and the start may fail (the process exists in the status where HORCM is
starting). In such a case, start HORCM setting the wait time for the
variable. The waiting time must be specified more than 5 seconds in
multiples of 5 seconds.
Table 1-24: Horcmstart Command Parameters (Continued)
Parameter
Value
NOTE: When this command is started in the status where a file under the
HORCM_LOG and HORCM_LOGS directory is opened in the case of Windows
2000 or Windows Server, the operation will terminate abnormally. In this
case, take actions as shown below since a message, which informs that the
file cannot be deleted or moved, is output.
• When a file under the HORCM_LOG and HORCM_LOGS directory is
opened, close the file, and then start the command.
• Investigate whether the program, which traces the directories and the
files in the drive, is operating in the background as a service (such as
CL and DTC service). If it is possible that the program collides with the
service, start the program by adjusting the time.
Summary of Contents for AMS 2000 Series
Page 6: ...vi Table of Contents Hitachi AMS 2000 Family Command Control Interface CCI Reference Guide ...
Page 244: ...4 18 Command options Hitachi AMS 2000 Family Command Control Interface CCI Reference Guide ...
Page 261: ...1 Hitachi AMS 2000 Family Command Control Interface CCI Reference Guide ...