1–26
Performing CCI Operations
Hitachi AMS 2000 Family Command Control Interface (CCI) Reference Guide
Options
-h:
Displays help, usage, and version information.
-q:
Terminates the interactive mode and exits this command.
-z or -zx:
Makes the pairevtwait command enter the interactive mode. The -
zx option guards performing of the HORCM in the interactive mode. When this
option detects a HORCM shut down, interactive mode terminates.
-I[H | M][instance#] or -I[TC | SI][instance#]: Specifies the instance
number and the command execution environment. Refer to
and option for command execution environment on page 1-4
-g <group>:
Specifies a group name defined in the configuration definition
file. This option must always be specified. The command is executed for the
specified group unless the -d <pair Vol> option is specified.
-d <pair Vol>:
Specifies a paired logical volume name defined in the
configuration definition file. When this option is specified, the command is
executed for the specified paired logical volumes.
-d[g] <raw_device> [MU#]:
Searches a group on the configuration
definition file (local instance) for the specified raw_device, and if the specified
raw_device is contained in the group, the target volume is executed as the
paired logical volume (-d) or group (-dg). This option is effective without
specifying the
“-g <group>“ option. If the specified the raw_device is contained in two or more
groups, the command is executed on the first group.
-FHORC or -FCA: Forcibly specifies a cascading TrueCopy or TCE volume for
specified pair logical volumes in a ShadowImage or SnapShot environment (see
example in
). If the -l option is specified, this option tests status of
a cascading TrueCopy or TCE volume on a local host. If no -l option is specified,
this option tests status of a cascading TrueCopy or TCE volume on a remote
host. The target TrueCopy or TCE volume must be P-VOL or SMPL.
-FMRCF [MU#] or -FBC [MU#]: Forcibly specifies a cascading ShadowImage
or SnapShot volume for specified pair logical volumes on a TrueCopy or TCE
environment (see example in
Figure 1-21, “Example of -FHORC Option for
.
). If the -l option is specified, this option tests status of a cascading
ShadowImage or SnapShot volume on a local host. If no -l option is specified,
this option tests status of a cascading ShadowImage or SnapShot volume on a
remote host. The target ShadowImage or SnapShot volume must be P-VOL or
SMPL.
-d[g] <seq#> <LDEV#> [MU#]:
Searches a group on the configuration
definition file (local instance) for the specified LDEV, and if the specified LDEV
is contained in the group, the target volume is executed as the paired logical
volume (-d) or group (-dg). This option is effective without specifying the “-g
<group>“ option. If the specified LDEV is contained in two or more groups, the
command is executed on the first group. The <seq #> <LDEV #> values can
be specified in hexadecimal (by addition of “0x”) or decimal notation.
-s <status> ...:
Specifies the waiting status, which is “smpl”, “copy/rcpy”,
“pair”, “psus”, or “psue”. If two or more statuses are specified following -s,
waiting is done according to the logical OR of the specified statuses. This option
is valid when the -nowait option is not specified.
Table 1-7: Pairevtwait Command Parameters (Continued)
Parameter
Value
Summary of Contents for AMS 2000 Series
Page 6: ...vi Table of Contents Hitachi AMS 2000 Family Command Control Interface CCI Reference Guide ...
Page 244: ...4 18 Command options Hitachi AMS 2000 Family Command Control Interface CCI Reference Guide ...
Page 261: ...1 Hitachi AMS 2000 Family Command Control Interface CCI Reference Guide ...
