Hitachi AMS 2000 Series, Reference Manual

Page: 172 / 262

3–16
Maintenance log and tracing functions
Hitachi AMS 2000 Family Command Control Interface (CCI) Reference Guide
9576 007C 84 Management information of
Dynamic Provisioning is being
updated. Retry after waiting for a
while.
9576 007D 84 The operation cannot be
performed due to insufficient
capacity of the DP pool for the
specified P-VOL. Check the capacity of the DP
pool.
9576 007E 84 The operation cannot be
performed due to insufficient
capacity of the DP pool for the
specified S-VOL. Check the capacity of the DP
pool.
9576 007F 84 The memory reconfiguration
process is in progress. Retry after the memory
reconfiguration process
completes.
9576 0080 84 The memory reconfiguration
process is in progress. Retry after the memory
reconfiguration process
completes.
9576 0081 84 The status of the specified S-VOL
is SMPL, COPY, or PAIR. Check the pair status.
9576 0082 84 There are no pairs in the specified
group whose status is SSWS. Check the pair status.
9576 905E 94 There is a SnapShot pair, which
has an MU number specified for a
SnapShot P-VOL, has not been
placed in the PAIR or PSUS status,
and whose S-VOL is one of the S-
VOLs with the specified CTG
numbers. Otherwise, the process
of reconfigure memory is in
progress on the remote array. Check the pair status of the
SnapShot. Otherwise, retry
after the process of
reconfigure memory is
completed.
9576 905F 94 There is no pair, which is in the
PAIR status, in the target CTG. Check the pair status of the
LU.
9576 x005 94 The LU of the remote array is
being formatted. Retry after waiting for a
while.
9576 x006 94 The remote array is undergoing
the pseudo deliberate shutdown. Retry after the pseudo
deliberate shutdown is
completed.
9576 x007 94 The remote array has undergone
the pseudo deliberate shutdown. Retry after waiting for a
while.
9576 x008 94 The S-VOL is undefined. Check the status of the LU.
9576 x009 94 The WWN of the remote array is
illegal. Check the array WWN.
9576 x00B 94 The remote array is undergoing
hot replacement of the firmware. Retry after waiting for a
while.
9576 x00C 94 A command error occurred. Retry after waiting for a
while.
9576 x00D 94 The optional feature of TrueCopy
of the remote array is invalid. Unlock and validate the
optional feature.
Table 3-5: Sense Codes (Continued)
Sense
code
Detailed
code
Sub
code
Error contents Recommended Action